Heavy Duty Hydraulic Cylinder manufacturers

Hier können Sie täglich Ihre Trading Strategien veröffentlichen und den ein oder anderen Trader mit Ihrem Know How unterstützen.

Heavy Duty Hydraulic Cylinder manufacturers

Beitragvon wry731 » 16.09.2019, 07:32

Yuan xing company engaged in the field of mine machinery hydraulic cylinder has a history of more than 10 years, has a wealth of experience and advanced technology, development of shield machine, mining truck, drill, crane and other mine machinery hydraulic oil cylinder.
Yuan xing company is skilled in mining machinery hydraulic cylinder buffer system, sealing system, corrosion prevention and other technologies.
In the mine machinery oil cylinder industry, yuan xing company has a remarkable achievement.
Mine machinery hydraulic cylinder used for a long time, the hydraulic oil cylinder of the hydraulic system control of the low pressure condition, sometimes may cause failure or mistake, these are the more common phenomenon, although the end result is the same, but it is not the same reason. Common causes of this phenomenon include:
Generally, this situation is because the throttling resistance in the control pipeline is too large, the regulation of the flow valve is not very correct, the control pressure is not appropriate, and the pressure source in the same inlet is also disturbed. This is the time to check the control pressure source to ensure that the pressure must be adjusted to the system's specified value.
If the flow valve or direction valve core is stuck or the valve hole is blocked, the hydraulic cylinder is more likely to misoperate or malfunction at this time. If such a situation occurs, the oil should be promptly inspected for contamination; Check to see if there is something dirty or colloidal sediment sticking in the valve core causing the valve hole to be blocked. Also check how worn the valve body is.
Product Process:
1. Raw materials entering the factory, 27SiMn, 40CrMo, ST52, 45# steel tubes or bars for choice
2. Do the pre-treatment including pickling, phosphating and saponification, and then cold-draw the seamless steel tubes.
3. Put the steel tubes into the tempering furnace to do the stress relief annealing in convenience of the subsequent the processing.
4. Multi-roll straightening machine, with 10 straightening points, achieves the automatic rolling straight improving the efficiency greatly
5. Heat treatment to obtain work pieces with different properties by changing their internal microstructure or surface chemical composition.
6. Cylindrical degree can be controlled within 0.03mm and the surface roughness is up to 0.4 by honing with range:φ40mm-φ450mm and longest length: 12000mm
7. Machining processes to obtain high precision parts with complex shapes strictly according to the detailed drawings.
8. Electroplating production process fulfills the functional and ornamental requirements for coating work pieces of different dimensions according to specific application requirements.
9. Cleaning all the parts by automatic cleaning machine in the special solution and under special temperature control effectively.
10. All the parts are assembled into complete cylinders according to the strict assembly instructions by skillful workers in dust-free workshop.
11. Do proof pressure and performance tests to check whether the cylinders can operate smoothly and stably under the specified pressure with no leakage and deformation.
12. Do the painting including high quality primer and topcoat to obtain beautiful appearance and protect the cylinders against the anticorrosion.
13. Wooden pallet or boxes packing with plastic films wrapped on the surface, suitable for long-time sea transport.
Product Advantages:
1. Easy to operate, easy to maintain
2. Reliable work, high efficiency
3. Solid structure, handsome in appearance
Large and medium-sized mining, metallurgy, forging, casting, engineering transportation, hydraulic machinery, food processing machinery, machine tools, civil engineering, construction machinery, chemical machinery, medical machinery, injection molding machinery, automated assembly line, Light industry machinery industry.
Terms and Conditions:
1. Everywhere should be kept clean, the piston rod should be regularly cleaned of dust;
2. Working fluid 46 # hydraulic oil, can not use alcohol, diesel, gasoline, etc ;
3. Working fluid application 120 mesh filter, and keep clean, regular inspection replacement;
Technical parameters:
Bore of cylinder/mm Piston rod /mm Working pressure 16MPa Stroke/mm
Speed ratio Push/KN Pull/KN
1.33 1.46 2 Ratio1.33 ratio1.46 ratio2
40 25 22 25 20.11 15.08 14.02 12.25 500
50 25 28 32 31.42 23.56 21.56 18.55 600
63 32 35 45 49.88 37.01 34.48 24.43 800
80 40 45 55 80.42 60.32 54.98 42.41 2000
90 45 50 63 101.79 76.34 70.47 51.91 2000
100 50 55 70 125.66 94.25 87.65 64.08 4000
100 55 63 80 152.05 114.04 102.18 71.63 4000
125 63 70 90 196.35 146.47 134.77 94.56 4000
140 70 80 100 246.30 184.73 165.88 120.64 4000
150 75 85 105 284.74 212.06 191.95 144.20 4000
160 80 90 110 321.70 241.27 219.91 169.65 4000
180 90 100 125 407.15 305.36 181.49 210.80 4000
200 100 110 140 502.65 376.99 350.60 256.35 4000
220 110 125 160 608.21 456.16 411.86 286.51 4000
250 125 140 180 785.40 589.05 539.10 378.25 4000
Quality certificate and production equipment:
Through our company's continuous efforts, strict requirements for product quality. The hydraulic cylinder produced by our company has passed the ISO9000, ISO9001 certification and the highest quality requirements.stipulated by our strict quality control system.
Our company is able to make production according to the standard and quantity required by the customer, and can guarantee the hydraulic cylinder product that the customer needs in the time limit, because we have advanced production equipment.
Such as: CNC lathe, processing center, SYT hydraulic cylinder test platform, hydraulic oil cylinder spraying equipment, hydraulic cylinder welding machine, ultrasonic cleaning equipment, quality inspection line.
Minimum order quantity: 5 pieces/piece
Supply capacity: 20,000 pieces per month
Port: Qingdao, China
Terms of payment: l/c, t/t
Standard or non-standard: non-standard
Structure: piston hydraulic cylinder plunger hydraulic cylinder
Power: hydraulic
Product materials: steel
Maximum stroke: 15,000mm
Shaft diameter: 10-500mm
Origin: shandong, China (mainland)
Model: hydraulic cylinder
Brand name: yuanxing
Color: yellow, orange, blue, red, black, etc.
Packing details: packing film + plywood box or according to customer requirements.
Delivery details: 25-40 days
Packaging and transportation:
1. Packaging: steel tray, plywood box, or according to customer requirements.
2. Shipping: shipping, air or express company.
In addition to the sales of our existing hydraulic cylinder products, our company can also produce hydraulic cylinder products according to customers' drawings or samples. In the production process, we strictly control the product quality to ensure each hydraulic cylinder product quality qualified. We provide the most advanced technical support and high quality after-sales service, hoping to establish long-term cooperation with customers.
Heavy Duty Hydraulic Cylinder manufacturers
Beiträge: 14
Registriert: 16.09.2019, 07:25

Zurück zu „%s“ Forex Trading Strategien und Methoden

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast